| Model
6124, 6134, and 6164 Series High Purity Depth Filters |
| Description |
| Matheson's
High Purity Depth Filters are efficient, reliable, and
economical filters for use with non-corrosive gases. These
filters utilize a microporous fiberglass media molded with an
acrylic binder and supported by a perforated 316 Stainless Steel
mesh screen. The gas stream enters the filter, flowing from
outside to inside the filter media. Particles are trapped in the
depth of the media, and the filtered gas exits through the
center. |
| Applications |
- Gas
Chromatography
- Biological
Studies
- Environmental
Work
- Gas
Sterilization
|
| Design
Features |
- All-welded
316 stainless steel housing
- Available
with a variety of pipe, tubing, and VCR connections
- Leak
tested with nitrogen
|
| Maximum
Operating Pressure: |
250
psig |
| Maximum
Operating Temperature: |
165°F |
| Maximum
Flow Rate: |
75-1000
slpm, depending on model |
| Filtration
Efficiency: |
100%
at 0.2 microns |
| Shipping
Weight: |
2
lb |
| Ordering
Information |
| Model |
Inlet/Outlet
Connection |
Max.
Flow SLPM** |
Dimensions |
| Filters
with Pipe Fittings |
| 6164
-P4FF |
1/4"
FNPT x FNPT |
150
|
3.0"
x 1.65" |
| 6134
-P8FF |
1/2"
FNPT x FNPT |
400
|
4.0
" x 2.37" |
| 6124
-P12FF |
3/4
" FNPT x FNPT |
1000
|
7.5
" x 2.37" |
| Filters
with Standard Swagelok®
Tube Fittings |
| 6164-T2FF |
1/8"
x 1/8"
|
30
|
4.9
" x 1.65" |
| 6164-T4FF |
1/4"
x 1/4" |
100
|
4.09"
x 1.65" |
| 6164-T6FF |
3/8"
x 3/8" |
150
|
4.27"
x 1.65" |
| 6134-T4FF |
1/4
" x 1/4"
|
200
|
4.82"x
2.37" |
| 6134-T6FF |
3/8
" x 3/8" |
400
|
5.0
" x 2.37" |
| 6134-T8FF |
1/2
" x 1/2" |
400
|
5.3"
x 2.37" |
| 6124-T6FF |
3/8
" x 3/8" |
500
|
8.0"
x 2.37" |
| 6124-T8FF |
1/2
" x 1/2" |
500
|
8.3"
x 2.37" |
| 6164-T4MM
* |
1/4
" tubing, 316SS |
75
|
4.95"
x 1.64" |
| Filters
with VCR®
or VCO®
Fittings |
| 6164-V4MF |
1/4"
VCR M x F |
100
|
4.33"
x 1.65" |
| 6164-V4MM |
1/4"
VCR M x M |
100
|
4.11"
x 1.65" |
| 6164-04MM |
1/4"
VCO M x M
|
100
|
3.81"
x 1.65"
|
| 6134-V8MM |
1/2"
VCR M x M |
150
|
5.12"
x 2.37" |
*NOTE:
This model is supplied with 1/4" tubing only, welded at
each end.
** @ 15 psig Inlet, Atmospheric Outlet. |
| Please
order Matheson Technical Bulletin TB-136 for additional information. |
|
|
