Cal-MAT 4000 Series
| Description |
| The Matheson Cal-MAT
4000 Series is a multi-component gas mixing system that
automatically blends up to three individual gases in a balance
gas. The gas mixes can be used to generate precise gas
calibration standards, create gaseous atmospheres, or produce
gas mixes for analytical research or production purposes. The
Cal-MAT 4000 can produce gas concentrations from percent to ppb
levels for single or multi-point calibrations. |
| The system consists of
two components, the 4000 Series instrument and the user’s
personal computer. The user interface is a Microsoft Windows
application that communicates with the Cal-MAT 4000 via an
RS-232 serial interface. |
| Features |
- Blends up to three
gases in a balance gas at user set concentrations
- Internally stored
mass flow controller calibration tables improve accuracy
- Modular design
allows for additional gas circuits to be added, increasing
system flexibility
- User definable
cylinder library allows for easy selection of frequently
used gas cylinders. Each cylinder may contain an unlimited
number of component gases, with automatic K-factor
calculation
|
| Software |
| The Windows-based
software for the Cal-MAT 4000 offers three basic modes of
operation: |
- Concentration Mode:
Allows user to create a blend by entering target gas
concentrations for each source gas cylinder and the desired
total output flow for the mixture.
- Flow Mode: Allows
user to specify the flow rate of each gas cylinder.
- Program Mode:
Provides the ability to program the instrument for
unattended operation. Programs can be recalled and run in
any sequence, at various times/dates.
|
| Specifications |
| Accuracy: |
From
10-100% of Full Scale Flow |
| Concentration: |
+/-
1.0% |
| Flow: |
+/-
1.0% |
| Repeatability: |
+/-
1.0% |
| Warm-up
time: |
30
minutes |
| Inlets: |
¼"
Swagelok |
| Outlet: |
¼"
Swagelok |
| Operating
pressures |
Minimum
10 psig (0.67 bar) |
Recommended:
|
25
psig (1.68 bar) |
Maximum:
|
75
psig (5.04 bar) |
| Wetted
Surfaces |
|
| Tubing: |
Electropolished
316 stainless steel |
| Mass
flow controllers: |
Stainless
Steel |
| Seals: |
Viton |
| Operating
Temperatures: |
32-122°
F |
| Weight: |
18
lbs (8.16 kg) with 2 mass flow controllers |
| 23
lbs (10.43 kg) with 4 mass flow controllers |
| Dimensions
(w X h X d): |
17"
X 4-1/4" X 20" (43 cm X 11 cm X 51 cm) |
| Electrical: |
110
to 240 VAC, 50/60 Hz |
| Electronics: |
12
Bit A/D and D/A conversion |
| RS-232
serial interface |
| Software: |
Instrument
control software (supplied on 3-1/2" floppy disks) |
| PC
Requirements: |
IBM
PC or compatible (486-33 or higher) |
| Microsoft
Windows 3.1 |
| 8
MB RAM |
| 10
MB Hard disk space |
| 3-1/2"
Floppy drive |
| RS-232
communication port |
| *Ordering
Information |
| Model |
Description |
| Cal-MAT
4000 Multi-Component Gas Mixing System* |
- One
balance gas mass flow controller and one component gas mass
flow controller
- 316
electropolished stainless steel tubing throughout
- One
balance gas inlet port and one component gas inlet port
|
| Options |
| 4000-01 |
Additional
mass flow controller |
| Please
order Technical Bulletin TB-357 for more information |
|
|
