| Gas Panel
Component Descriptions |
| Valves:
316 stainless steel body and diaphragm with Kel-F® seats for
positive shut-off. All valves are connected firmly to the
backplate but are easily removable from the front for
maintenance. |
| Check
Valves: 316 stainless steel body and poppet with Viton®
seat. Check valves are provided on all vent lines and purge gas
inlet lines.
|
| Pressure
Regulators: 316 stainless steel body and diaphragm with PFA
Teflon® seat. Available in a variety of pressure ranges to
safely reduce cylinder pressure to your system. Model 3510
Series stainless steel single stage regulators are typically
used. Model 3810 Series stainless steel dual stage regulators
are available as an option.
|
| Gauges:
316 stainless steel socket and bourdon tube with dual scale
showing pressure in both English and International units. |
| Connections:
All major panel components are fitted with compression or pipe
thread connections for ease of removal and replacement. Welded
joints are used to minimize the number of connections and ensure
high purity.
|
| Backplate:
Constructed of carbon steel and coated with corrosion resistant
paint, the panel has mounting holes for easy installation in
your gas cabinet. Panel also has labeling of all panel
components to aid in operation of the controls. |
| Connection
to the Cylinder Valve*: May be a flexible coiled loop of
stainless steel tubing or a stainless steel braided flexible
hose with the appropriate CGA connection. |
| *
This item must be ordered separately when ordering a panel (see
below). |
