Oxyclip/Toxyclip
Disposable Monitors
Model 8055 |
| Description |
 |
A
revolution in personal monitors, the Oxyclip/Toxyclip Monitors
provide one full year of uninterrupted protection, 24 hours a
day, 7 days a week, with absolutely no maintenance required,
ever. Simply break off the pull-out tab and the unit is
activated for one full year. Battery replacement, battery
charging, sensor calibration and service are never needed. A
life cycle indicator shows lifetime remaining, and an audible
alarm provides 48 hour notice so that the shift can be
completed in safety. |
| Available
for oxygen, carbon monoxide and hydrogen sulfide, a custom LCD
and 75 decibel alarm alerts workers to potentially dangerous
situations immediately. This Go/No-Go design eliminates
decision making in the field. For added safety, the alarms
cannot be reset while a hazard exists. |
| These
pocket-size, lightweight, personal monitors weigh just 3.5
ounces and can be easily clipped onto a shirt pocket, lapel or
hard-hat. |
| The
Oxyclip/Toxyclip Monitors use Application Specific Integrated
Circuits (ASIC microchips) to ensure accurate and dependable
performance. A tough industrial RFI/EMI shielded case ensures
all components are protected |
| These
Monitors have UL, CSA and MSHA approval for Class I, Division
I, Group A, B, C & D. |
| Specifications |
| Custom
LCD Display: |
Alarm,
gas type, status, low battery & life cycle indicators |
| Visual
Alarm: |
Flashing
gas indicator |
| Audible
Alarm: |
75
decibel at 3 feet (1 meter) |
| Power
Source: |
Internal
lithium battery; charging or replacement not required |
| Calibration: |
Not
required |
| Enclosure: |
Impact
resistant nylon with Celstram™; RFI/EMI shielded |
| Dimensions
(LxWxH): |
3.5"x2"x1.3"
(89cm x 51cm x 33cm) |
| Weight: |
3.8
ounces (107 grams) |
| Life
Expectancy: |
1
year (8,800 hours). Note that units have limited shelf life
prior to activating. |
| Warranty: |
1
year |
| Approvals: |
UL,
CSA, MSHA for Class I, Division I, Group A, B, C & D |
|
|
O2
|
CO
|
H2S
|
|
Sensor Type:
|
Electrochemical
|
|
Sensor Range:
|
0-30%
|
0-1000 ppm
|
0-1000 ppm
|
|
Response to Alarm:
|
<3 sec
|
<3 sec
|
<6 sec
|
|
Alarm Accuracy (signal
over life):
|
±0.5%
|
±3ppm
|
±1.5ppm
|
|
Repeatability (of
signal):
|
0.1%
|
1.9ppm
|
0.5ppm
|
|
Operating Temperature:
|
-15 - 45ºC
-5 - 113ºF
|
-5 - 40ºC
23 - 104ºF
|
-40 - 40ºC
-40 - 104ºF
|
|
Operating Humidity:
|
15% to 90%
|
|
Alarm Setting:
|
19.5%
|
35 ppm
|
10 ppm
|
| Ordering
Information |
| Model |
Description |
| 8055-OXY |
Oxyclip
Oxygen Monitor |
| 8055-CO |
Toxyclip
Carbon Monoxide Monitor |
| 8055-H2S |
Toxyclip
Hydrogen Sulfide Monitor |
|
|
