| Model 1
Series Deluxe General Purpose Brass Regulator, Single Stage |
| Description |
General purpose
regulators with a rugged construction, for use with
non-corrosive gases.
 |
|
|
Applications
|
- Calibration
of pressure gauges, rotameters, and mass flowmeters
- Applications
with high duty cycle/demanding operating conditions
|
| Design
Features/Components |
- Forged
brass bodies
- Neoprene
diaphragms
- 2"
inlet and delivery pressure gauges
- Equipped
with outlet needle valve
- ¼"
NPTM outlet connection
- Porous
metal filter to protect seat from contamination
|
| Materials
of Construction |
| Gauges: |
Chrome
plated brass |
| Body: |
Forged
brass |
| Bonnet: |
Chrome
plated die-cast zinc |
| Diaphragm: |
Neoprene |
| Seat: |
P.T.F.E.
Teflon |
| Seals: |
Neoprene |
| Maximum
Inlet Pressure: |
3000
psig (20, 700 kPa)
Model 1PA: 400 psig (2,760 kPa) |
Maximum
Flow Rate:
(At 2000 psig, N2) |
Model
1, 1P: 600 SCFH (285 SLPM)
Model 1L: 1150 SCFH (540 SLPM)
Model 1H: 2400 SCFH (1130 SLPM) |
| (At
400 psig, N2): |
Model
1PA: 360 SCFH (170 SLPM) |
| Flow
Capacity (Cv): |
0.17
without outlet valve |
| Operating
Temperature: |
-20ºF
to 140°F (-29°C to 60°C) |
| Porting: |
1/4"
NPT Female |
| Porting
Configuration: |
2
High, 2 Low |
| Shipping
Weight: |
7
lbs |
| Regulator
Flow Charts |
| Model |
Flow
Chart |
| 1PA-510 |
|
| 1P-CGA |
|
| 1-CGA |
|
| 1H-CGA |
Flow
Chart |
| 1L-CGA |
|
| Ordering
Information |
| Model |
Delivery
Pressure Range |
Delivery
Pressure Gauge |
Cylinder
Pressure Gauge |
| 1PA-510* |
2-15
psig |
0-15
psig |
0-400
psig |
| 1P-CGA |
4-35
psig |
0-60
psig |
None |
| 1-CGA |
4-35
psig |
0-60
psig |
0-3000
psig |
| 1L-CGA |
4-80
psig |
0-100
psig |
0-3000
psig |
| 1H-CGA |
10-180
psig |
1-200
psig |
0-3000
psig |
*For
Acetylene Service Only
Some CGA limitations may apply. |
| Please
order Matheson Technical Bulletin TB-167 for additional
information. |
| Model |
Description |
| 400V |
Check Valve |
| 6103 |
Flash
Arrestor |
| CON-0208-BO |
Compression
Tube Outlet (1/4") Connection (Brass) |
|
|
