|
| Model
3330 Series Corrosive Service Lecture Bottle Regulator |
| Description |
A compact and economical
regulator for use with most corrosive gases sold in lecture
bottles.
 |
|
| Applications |
| Use with low pressure
(1-6 psig) applications with corrosive gases in lecture bottles;
if higher pressures are required, use the 3570 Series Mini
Regulator |
| Design
Features/Components |
- PVC body
- Teflon diaphragm
- 1-1/2" delivery
pressure gauge
- Porous metal filter
protects seat from contamination
- Equipped with outlet
needle valve
- ¼" NPTM
fitting on outlet
|
| Materials
of Construction |
| Gauge: |
316
stainless steel |
| Body: |
Polyvinyl
chloride |
| Bonnet: |
Polyvinyl
chloride |
| Diaphragm: |
Teflon® |
| Seat: |
Kel-F® |
| Seals: |
Teflon® |
| Trim: |
316
stainless steel |
| Maximum
Inlet Pressure: |
3000
psig (20,700 kPa) |
Maximum
Flow Rate:
(At 2000 psig, N2): |
Model
3331: 500 SCCM
Model 3332: 90 SCFH (40 SLPM) |
| Flow
Capacity (Cv): |
0.011 |
| Operating
Temperature: |
30ºF
to 120ºF (-1 to 49°C) |
| Body
Porting: |
|
Inlet
Gauge/Outlet
|
1/8"
NPT female
1/4" NPT female |
| Porting
Configuration: |
1
High, 2 Low |
| Shipping
Weight: |
2 lbs |
| Ordering
Information |
| Model |
Delivery
Pressure Range |
Delivery
Pressure Gauge |
| 3331
(CGA 180) |
0-18"
water column |
None |
| 3332
(CGA 180) |
1-6
psig |
0-15
psig |
| Options |
| Model |
Description |
| 401 |
Outlet Check
Valve |
| WAS-0039-PB |
Gaskets for
CGA 180 |
| 504 |
Wall Mount
Bracket |
| 505 |
Non-Tip
Stand |
| 4754-180 |
Tee Purge
Assembly |
|
|
