About us ] Contact us ] Literature & Tools ] ONSITE MONITORING ]                  

Model 3450 Series


Specialty Gases and Equipment
Your #1 Gas Supplier

(514) 956-7503

 
Model 3450 Series High Flow Line Regulator

Description
A high purity line regulator for use with non-corrosive or semi-corrosive gases including dichlorosilane, ammonia, or amines in high flow applications.

Applications
Point of use regulation of gases in high purity, high flow applications (up to 730 scfh)

Design Features/Components
  • High purity 316L stainless steel body
  • 316 stainless steel diaphragm
  • Metal to metal seals minimize diffusion of contaminants
  • 2" delivery pressure gauge
  • Bonnet ported and threaded to pipe gases away from work area
  • Equipped with outlet diaphragm valve
  • ¼" compression tube fitting on outlet
  • Porous metal filter protects seat from contamination
  • Bonnet threaded for panel mounting
  • Body screw thread tapped for back mounting

Materials of Construction
Gauges: 316 stainless steel
Body: 316L stainless steel
Bonnet: Nickel plated brass 
Diaphragm: 316 stainless steel
Seat: PFA Teflon®
Seals: Metal to metal

Specifications
Maximum Inlet Pressure: 500 psig (3,450 kPa)
Maximum Flow Rate:
(At 500 psig, N2):
Model 3452: 300 SCFH (130 SLPM)
Model 3454: 730 SCFH (320 SLPM)
Flow Capacity (Cv): 0.70
Operating Temperature: -40ºF to 165ºF (-40ºC to 74ºC)
Porting: 1/4" NPT female
Porting Configuration: 1 High, 3 Low
Shipping Weight: 5 lbs

Ordering Information
Model Delivery Pressure Range Delivery Pressure Gauge
3452 2-30 psig 30"vac-0-60 psig
3454 4-100 psig 30"vac-0-200 psig
3452-678** 2-30 psig 30"vac-0-60 psig
**For Dichlorosilane only
NOTE: This Series cannot be supplied with CGA connections rated higher than 500 psig.

Options
Model Description
OPN-0301-SA Swagelok® 1/4" Tube Fitting
ADP-0047-BK Bonnet Venting Fitting
KIT-0204-SA Bonnet Panel Mounting Kit
ADP-0016-BA Bonnet Vent Adapter to 1/8" FNPT
MSP-0012-XX Inboard Helium Leak Rate Certification
MSP-0013-XX Combination Inboard/Outboard Helium Leak Rate Certification
 

Copyright © 1990-2012. MEGS Specialty Gases, Inc. All rights reserved. (514) 956-7503
Send comments or suggestions regarding this site to webmaster@megs.ca
This page was last updated December 05, 2003